Zhuohang Precision Machining Factory

Machining Factory

The inspection bench, because it is the part of the factory that checks the rest of it. Look for the instruments themselves — the Hexagon GLOBAL S CMMs, the vision measuring machines, the gear measuring center, the laser microscope and profilometer, the hardness and coating thickness testers, the XRF spectrometer — and then look for the calibration stickers on each one, with dates that are current, not expired.

An inspection area with the right instruments and current calibration is what converts a tolerance from a claim into a measurement. An inspection area that is clean because it is rarely used is a warning sign, not a virtue — in a working factory the bench shows signs of daily use, because it is the busiest station in the building.

How does material move through the factory?

Zhuohang MES production management dashboard, Dongguan, China
Milling centers on the production floor
Zhuohang Precision Machining Factory machining factory exterior in Dongguan, China
6,800 m² facility in Hengli Town, Dongguan

Follow the material. It enters at receiving, where every lot is checked by XRF against its mill certificate; it moves to cutting, where the machines run it; it passes to inspection, where the CMM measures it; and it leaves through packing with its reports. Each of these steps is a place where your audit asks one question — is this step real, and is it recorded?

The material flow is the traceability made physical. Because the MES/ERP system records the chain — raw material source, machine, operator, batch and inspection results — the flow on the floor has a matching paper trail. When you watch a lot move from receiving to shipping with its documentation intact, you are watching the quality system work, not reading about it.

What do the workforce and continuity tell you?

Mazak INTEGREX i-250H S multi-tasking mill-turn centre at Zhuohang Precision Machining Factory, Dongguan, China.
Mill-turn center in production

A machining factory is its people, and stability shows. This one has been operating since 2005 as Dongguan Zhuohang Ltd (registration 91441900MA4UWT6X39), with 100+ staff, 80% skilled technicians, and 60% with five to ten years of experience, under a founder with 28 years in the industry. Those numbers matter to an audit because machining tolerances are held by experience as much as by machines — a shop that keeps its people keeps its capability.

Continuity is also a risk signal in the other direction: a factory that has survived two decades of export cycles, kept its certifications current and retained its skilled operators is a factory whose processes are repeatable, not a one-off shop chasing a single order. An auditor weights that continuity heavily, and it is the kind of thing a paper certificate cannot fake.

Skill retention matters to the audit because tolerances live in people as much as in machines. A shop where the same operators have run the same Mazak or TSUGAMI machines for years holds a tolerance by habit, not by accident; a shop with constant turnover is re-learning its own process every quarter. Ask who has been there longest, and whether the person who will run your part has run that part's geometry before — the answer tells you more about repeatability than a machine list can.

Can I audit the factory without traveling?

Yes, and for most buyers the first visit should be a screen. A live video walkthrough shows the same things an in-person audit does — machines running, the inspection area, the material check at the door — without the flight. It is not a substitute for a physical audit on a large program, but it is a fast, cheap first filter that a genuine factory will agree to immediately and a trading desk will dodge.

This factory offers the walkthrough on request, and an in-person audit can be scheduled the same way for buyers already in southern China. The address is No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470 — about an hour from Shenzhen Bao'an International Airport, which makes the physical visit straightforward when the program justifies it.

Which industries does this factory supply?

The industries a factory serves are a proxy for the standards it meets. This one machines for automotive, robotics, electronics, medical and automation equipment, exporting to Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa. Automotive and medical work, in particular, force a discipline — SPC, PPAP, PFMEA, traceability — that then protects every other job on the floor.

That is the useful audit insight: the process control a factory built for its most demanding customer is applied to your part too, because it is cheaper to run one disciplined system than two. When you audit a factory that supplies automotive, you are auditing the discipline that industry demanded, and that is the discipline your parts inherit.

What does work-in-progress and station paperwork reveal?

Work-in-progress is the most honest signal on the floor, because it cannot be staged. A real production line has parts in every state — raw bars staged at receiving, half-machined parts in fixtures, finished parts waiting at inspection, and bins of chips under the machines. A showroom has clean machines and an empty floor, because nothing is actually being made. The audit reads WIP as proof of life: if every machine is spotless and nothing is in motion, you are looking at a display, not a plant.

The station paperwork is the same test at the document level. In a working factory, each machine or work cell carries the current job's traveler — the print, the route card and the inspection record that moves with the part. Its absence is the tell: a shop that cannot show a traveler for the job in front of it is not running a documented process, whatever its quality manual says. The traveler is traceability made visible, and the audit asks to see it on the spot.

How does location and the surrounding supply chain matter to the audit?

A factory's location is a supply-chain fact, not a footnote. This one sits in Hengli Town, Dongguan, in the Pearl River Delta — a region dense with the material suppliers, heat treaters, anodizers and tool grinders that machining depends on. For the audit, that density is a risk question: a shop surrounded by qualified secondary processors has short, known finishing routes, while an isolated shop has longer ones. The audit records who the shop relies on, and the location explains whether those partners are next door or a province away.

Location also shapes your own audit logistics. The address — No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470 — is about an hour from Shenzhen Bao'an International Airport, which makes an in-person visit straightforward for you already in southern China, and makes the video walkthrough a reasonable first step for everyone else. The location does not change the evidence questions; it changes how cheaply you can go and see the answers yourself.

What this shop actually runs

We machine every part in our own 6,800 m² plant in Dongguan, China, on 100+ CNC machines with 100+ staff. The machine list by category:

  • 5-axis machining centres (10+) - Mazak VARIAXIS I-600 (510/910/510 mm travel, 12,000 rpm, 22 kW, 71.6 N·m, 30-tool BT40) and Mazak INTEGREX I-250H S (B-axis 0.0001°, 24 kW, 124 N·m, 38-tool HSK-A63). Cut on compound-angle parts, single-setup multi-face prismatic work, and aerospace fittings where datum transfer loss is unacceptable.
  • 3-axis / 4-axis machining centres (50+) - Brother SPEEDIO S500Z2N / S700Z2N (10,000 rpm, 14/21-tool ATC, 0.7 s tool-to-tool, Z-axis 2.2 G) and Mazak VCE-430A L / VCE-570C L (10,000 rpm, 118 N·m, 24-tool ATC). Cut on prismatic parts, plates, brackets, housings.
  • Swiss-type turning centres (10+) - Citizen Cincom A20-3F7 (Φ20 mm, 10,000 rpm), TSUGAMI B0206-III / B0205-III (Φ20 mm, 0.1 µm), STAR SR-32JII / SR-32J Type N (Φ32 mm, 8,000 rpm). Cut on long, slender rotational parts at ±0.002 mm.
  • CNC turning centres (20+) - HEADMAN T70M/1250 (720 mm swing, 117 mm bore, 3,000 rpm, BMT75 12-station turret). Cut on shafts, bushings, flanges up to ±0.002 mm.
  • Wire EDM (5+) - Sodick AQ535L (550/350/300 mm travel, ±20° taper, 800 kg workpiece). Cut on hardened tool steel, internal splines, sharp internal corners that milling cannot reach.
  • Inspection: Hexagon CMM + 20+ gauges - Hexagon CMM for coordinate measurement, plus vision system, profilometer, hardness tester, coating thickness gauge, XRF for material verification. The 10:1 rule (gauge 10x more accurate than the band) is applied to every feature.
  • Machine highlights - VARIAXIS I-600: one-setup multi-face 5-axis + MAZA-CHECK auto-calibration; INTEGREX I-250H S: DONE-IN-ONE mill-turn, B-axis 0.0001° + Ai thermal shield; SPEEDIO S500Z2N / S700Z2N: Z-axis 2.2 G + 0.7 s ATC; Swiss-type: guide-bush switchable + 0.1 µm resolution.

Tolerance: ±0.003 mm CNC milling / ±0.002 mm CNC turning / ±0.002 mm grinding and wire EDM. Capability: Ppk >= 1.67 initial on key characteristics, Cpk >= 1.33 ongoing.

Certificates: ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, with design clause 8.3 excluded, stated openly) and ISO 14001:2015 (116024/B/0001/UK/En), issued to Dongguan Zhuohang Ltd, registration 91441900MA4UWT6X39, founded 2005.

Where we ship: Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — plus other countries and regions worldwide, shipped from our base in Dongguan, China.

Contact: Felipe Iglesias, [email protected], +86 13126536955.

See the factory before you commit

Email [email protected] or call +86 13126536955 for a live video walkthrough or an in-person audit.

Frequently Asked Questions

What should I look for when I audit a machining factory in person?

In short, Match the machine list to the floor, check that machines are running rather than staged, look at the inspection area and its calibration stickers, and watch how material moves from receiving to the machines. A real production line shows work in progress and documentation at every station; a showroom shows clean machines and no paper.

How large is the factory and how many machines does it run?

In short, The facility is 6,800 m² in Hengli Town, Dongguan, and runs 100+ production machines — 3-axis milling (50+), 4-axis (20+), 5-axis (20+), 25+ lathes, mill-turn centers and 7+ grinders — plus 20+ inspection instruments. These are stated by family and count so an auditor can match them to the floor.

Where is the factory located?

In short, At No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470.

Can I see the factory without traveling?

In short, Yes. A live video walkthrough of the floor is available on request — machines running, the inspection area, and the material check at the door — so the first visit needs no plane ticket.

How long has the factory been in operation?

In short, Since 2005, so roughly two decades of machining under the same Dongguan Zhuohang Ltd entity.

Is the factory auditable for certifications?

In short, Yes — ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En) and ISO 14001:2015 (116024/B/0001/UK/En), all issued by URS. The IATF 16949 scope excludes product design under Clause 8.3, so the factory is build-to-print, and the certificate numbers are checkable with the registrar.

What industries does the factory serve?

In short, Automotive, robotics, electronics, medical and automation equipment, exported to Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — based in China, serving customers worldwide. The automotive-grade process control — SPC, PPAP and PFMEA — runs on every job, not only automotive ones, which is what an auditor checks for.

How do I schedule a factory audit or walkthrough?

In short, Email [email protected] or call +86 13126536955 and ask for the walkthrough or audit in the same message as your drawing. A video walkthrough is available on request, and an in-person audit can be arranged for buyers visiting southern China, with the document checklist provided up front.

Standards referenced on this page

  • IATF 16949:2016 — Automotive quality management system standard
  • ASTM A582/A582M-12 — Standard Specification for Free-Machining Stainless Steel Bars
  • ASTM E8/E8M-21 — Standard Test Methods for Tension Testing of Metallic Materials